Tanked Package D.E. Systems
Edge Outlet – Large Leaf
GENERAL NOTES
Tank laminate is constructed of alternate layers of fiberglass fabric and resin.
A “C-glass” surfacing veil shall be used.
Resin System shall be a general purpose resin suitable for the service conditions.
Construction shall be in the hand lay-up method in accordance with NBS PS 15-69 Voluntary Product Standard.
Flanges shall be drilled to 150# ASNI standard.
Dimensional variations shall be plus or minus 1/8″ for all dimensions.
Drain and overflow connections to be standard PVC socket weld fittings.
Tank requires full bottom support.
Flange bolt holes shall straddle north-south centerlines.
Nozzle “B” must have minimum height of 12″, maximum height no greater than 34″. Nozzle “B” can also be located on the 72″ side of the tank if desired. Baffle must be between inlet port and filter leaves.
Bottom Outlet – Large Leaf
GENERAL NOTES
Tank laminate is constructed of alternate layers of fiberglass fabric and resin. A “C-glass” surfacing veil shall be used.
Resin System shall be a general purpose resin suitable for the service conditions.
Construction shall be in the hand layup method in accordance with NBS PS 15-69 Voluntary Product Standard.
Flanges shall be drilled to 150# ASNI standard.
Dimensional variations shall be plus or minus 1/8″ for all dimensions.
Drain and overflow connections to be standard PVC socket weld fittings.
Tank requires full bottom support.
Flange boltholes shall straddle north-south centerlines.
Nozzle “B” must have minimum height of 12″, maximum height no greater than 34″. Nozzle “B” can also be located on the 72″ side of the tank if desired. Baffle must be between inlet port and filter leaves.
Edge Outlet – Small Leaf
GENERAL NOTES
Tank laminate is constructed of alternate layers of fiberglass fabric and resin.
A “C-glass” surfacing veil shall be used.
Resin System shall be a general purpose resin suitable for the service conditions.
Construction shall be in the hand lay-up method in accordance with NBS PS 15-69 Voluntary Product Standard.
Flanges shall be drilled to 150# ASNI standard.
Dimensional variations shall be plus or minus 1/8″ for all dimensions.
Drain and overflow connections to be standard PVC socket weld fittings.
Tank requires full bottom support.
Flange bolt holes shall straddle north-south centerlines.
Nozzle “B” must have minimum height of 12″, maximum height no greater than 16″. Nozzle “B” can also be located on the 72″ side of the tank if desired. Baffle must be between inlet port and filter leaves.
Bottom Outlet – Small Leaf
GENERAL NOTES
Tank laminate is constructed of alternate layers of fiberglass fabric and resin.
A “C-glass” surfacing veil shall be used.
Resin System shall be a general purpose resin suitable for the service conditions.
Construction shall be in the hand layup method in accordance with NBS PS 15-69 Voluntary Product Standard.
Flanges shall be drilled to 150# ASNI standard.
Dimensional variations shall be plus or minus 1/8″ for all dimensions.
Drain and overflow connections to be standard PVC socket weld fittings.
Tank requires full bottom support.
Flange boltholes shall straddle north-south centerlines.
Nozzle “B” must have minimum height of 12″, maximum height no greater than 16″. Nozzle “B” can also be located on the 72″ side of the tank if desired. Baffle must be between inlet port and filter leaves.
