Description

PoolLink® 100 Series performs continuous monitoring and correction of pH and sanitizer according to your present levels. Incremental testing and treatment, based on this demand, is called proportional dosing, Proportional dosing results in far more precise and economical water treatment than manual and set-point systems can provide.

PoolLink® 100 Series will provide water that is consistently balanced and pleasant for swimmers. It will reduce the time spent manually testing and correcting pool chemistry, freeing time for other duties. Because proportional dosing reduces changes in chemistry which use or require more chemicals, operations often see reductions in chemical use of 20 to 40%.

All choices and values are entered with a simple 4 button keypad. The Liquid Crystal Display (LCD) shows the current pH, ORP and CI/ppm. Dosing action being taken by the controllers is also displayed on the LCD.

Three-level Controls (EZLink Menus)

1. Puts manual feed control and offset standardization right at your fingertips

2. User Menu provides access to basic operating functions – allowing the ideal pH, sanitizer settings and other primary operational functions to be adjusted within preset alarm or operational limits.

3. Service Menu is accessed with a special keystroke combination – allowing the supervisor to set the control mode, set or alter alarms values and have full programming access.

Advanced Features

PoolLink®  100 Series can be operated as a proportional or basic set-point controller. It can operate under ORP or ppm control and display values in ORP, CI/ppm or both. Features alarms that can be set and activated at the operator’s discretion. Many additional functions are user-selectable.

In the event of a power loss, PoolLink® 100 series retains all alarm values and settings in microcomputer memory and an internal timer with no battery replacement.